JLG Toucan 12E, Operation And Safety Manual

Page: 126 / 136

SECTION 6 – GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6-50 – JLG Lift – 31210162
8-2 Platform Load Sense
8-6 Steering/Axle
DTC FAULT MESSAGE DESCRIPTION CHECK
825
LSS HAS NOT BEEN
CALIBRATED The Load Sensing System has not been cali-
brated. Refer problem to a qualified JLG mechanic.
829
FUNCTIONS CUTOUT -
PLATFORM OVERLOADED The platform is overloaded and functions are
restricted. • Unload the platform.
• Check if the overload switch is obstructed or jammed.
Refer problem to a qualified JLG mechanic.
8210
OVERLOAD SENSOR ERROR Inconsistency in the overload sensor information. • Check if the overload switch is damaged.
Refer problem to a qualified JLG mechanic.
DTC FAULT MESSAGE DESCRIPTION CHECK
8664
STEER SENSOR - OUT OF
RANGE HIGH Invalid signal from the steer sensor. • Check the steer sensor for damage.
Refer problem to a qualified JLG mechanic.
8665
STEER SENSOR - OUT OF
RANGE LOW Invalid signal from the steer sensor. • Check the steer sensor for damage.
• Check the steer sensor is securely mounted.
Refer problem to a qualified JLG mechanic.