JLG Toucan 12E, Operation And Safety Manual

Page: 100 / 136

SECTION 6 – GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6-24 – JLG Lift – 31210162
Swing Bearing Teeth
Lube Points - Coat each tooth
Capacity: A/R
Lube - B (See Table 6-6)
Interval - Every 1000 hours of operation
1. Remove chassis hoods.
2. From ground control station, raise the mast to gain
access to the turntable plate.
3. Remove bearing teeth covers (1) .
4. Apply grease on teeth using a brush (2) .
Figure 6-14. Swing Bearing Teeth lubrication
1
1
2