
SECTION 6 – GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6-20
– JLG Lift –
31210088
3.
The tightening of the lug nuts should be done in stages.
Following the recommended sequence, tighten lug nut
per wheel torque.
4.
Wheel lug nuts should be torqued after the first 50 hours
of operation and after each wheel removal. Check
torque every 3 month or 125 hours of operation.
6.8 LUBRICATION
NOTE:
Recommended lubricating intervals are based on
machine operation under normal conditions. For
machines used in multi-shift operations and/or exposed to
hostile environments or conditions, lubrication frequen-
cies must be increased accordingly.
Table 6-9. Wheel Torque Chart
Torque Sequence Studs A
1
st
Stage
2
nd
Stage
3
rd
Stage
28-42 N.m
(20-30 ft.lbs)
91-112 N.m
(65-80 ft.lbs)
142-163 N.m
(105-120 ft.lbs)
Torque Sequence - Studs B
1
st
Stage
2
nd
Stage
3
rd
Stage
25-35 N.m
(18-25 ft.lbs)
70-84 N.m
(51-62 ft.lbs)
120-140 N.m
(88-103 ft.lbs)
Summary of Contents for TOUCAN 10E
