JLG TOUCAN 10E, Operation And Safety Manual, Page: 82 / 130

SECTION 6 – GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6-12 – JLG Lift – 31210088
Filling System Draining (If equipped)
Frequency - Prior to extended use in cold chamber or outdoor
storage when temperatures could fall below freezing.
1. Battery Filling Network Draining
- Disconnect the can (c) from the battery filling network (1).
- Connect the pipe (b) on the battery filling network outlet (2).
- Connect the bulb (a) on the battery filling network inlet (1).
- Press the bulb to drain the filling circuit.
- Disconnect the bulb (a) while maintaining it pressed.
- Squeeze valve (3) to let the bulb (a) blow up again.
- Repeat the last 4 steps untill complete draining of the
circuit.
- Disconnect the bulb (a) and the pipe (b).
2. Can Draining
- Connect the pipe (b) on the can (c).
- Press on the battery filling system button until the can
is empty.
- Disconnect the pipe (b) from the can (c).
3. Reconnect the can (c) on the battery filling network (1).
Figure 6-6. Filling System Draining