JLG TOUCAN 10E, Operation And Safety Manual, Page: 40 / 130

SECTION 3 – MACHINE CONTROLS AND INDICATORS
3-8 – JLG Lift – 31210088
DO NOT RELEASE THE SWINGING MOTOR UNLESS THE MACHINE IS ON
A LEVEL SURFACE.
Figure 3-5. Manual Swinging Operating Devices
1. Open the access door to the pump/motor assembly.
2. Fully unscrew the rotary valve.
3. Depending on equipment, engage a square 1/2 inch
ratchet wrench in the square hole on top of the pinion or
lift the folding lever. Push on top of the pinion to engage
it in the turntable bearing teeth. Turn the lever clockwise
to swing the structure to the right or turn the lever coun-
ter-clockwise to swing the structure to the left.
4. When finished swinging, depending on equipment,
remove the wrench from the pinion or fold back the lever
until it is latched. Fully screw in the rotaty valve.
NEVER LEAVE THE MACHINE WITH A WRENCH ENGAGED ON THE PIN-
ION, WITH THE LEVER UNFOLDED OR WITH THE ROTARY VALVE
UNSCREWED.
Platform Control Station
TO AVOID SERIOUS INJURY, DO NOT OPERATE MACHINE IF ANY CON-
TROL LEVERS OR SWITCHES CONTROLLING PLATFORM MOVEMENT
DO NOT RETURN TO THE OFF OR NEUTRAL POSITION WHEN
RELEASED.