JLG TOUCAN 10E, Operation And Safety Manual, Page: 37 / 130

SECTION 3 – MACHINE CONTROLS AND INDICATORS
31210088 – JLG Lift – 3-5
4. Platform/Off/Ground Selector Switch - A three-posi-
tion, key-operated power select switch supplies power
to the platform or ground controls and powers machine
down in the off position.
5. Battery Charger Status Indicators - This panel is
designed to give the operator an accurate reading on
the status of the battery charger. DEPENDING ON THE
CHARGER INSTALLED ON THE MACHINE THOSE
LIGHTS MAY NOT BE USED. REFER TO SECTION 4-10
OF THIS MANUAL FOR FURTHER INFORMATION.
GREEN - Charge complete
YELLOW - Charging in process
RED - Charging abnormal
6. Emergency Stop Switch - Depress the switch to stop
all functions of the machine. The switch must be turned
clockwise to restore the machine functions.
7. Function Enable Button - A membrane switch that must
be pushed in and held to enable the controls of the
ground control station.
8. Mast Lift/Lower Buttons - Membrane switches that pro-
vide raising or lowering of the mast (with the Function
Enable Switch (7) pushed in).
9. Jib Lift/Lower Buttons - Membrane switches that pro-
vide raising or lowering of the jib (with the Function
Enable Switch (7) pushed in).
10. Superstructure Swing Buttons - Membrane switches
that provide swinging of the superstructure to the right
or to the left (with the Function Enable Switch (7)
pushed in).
11. Brake Release Switch
DO NOT MANUALLY DISENGAGE THE BRAKES UNLESS THE MACHINE:
- IS IN TRANSPORT (STOWED) POSITION.
- IS ON A SMOOTH, FIRM AND LEVEL SURFACE.
- WHEELS CHOCKED OR MACHINE POSITIVELY CONNECTED TO TOW
VEHICLE.
The machine must be powered ON to Ground Control Mode
at the Platform/Off/Ground selector switch to operate the
brake release switch. Refer to section 4-12 of this manual for
further information.