JLG T500J, Service And Maintenance Manual

Page: 260 / 306

SECTION 6 - JLG CONTROL SYSTEM
6-26 3121200
6.9 MACHINE ORIENTATION WHEN SETTING
SPEEDS
LIFT: Telescope retracted, lift up, and record time. Lift down
and record time.
SWING: Boom lift at full elevation, telescope retracted, swing
360 degrees and record time Swing opposite 360 degrees and
record time.
TELESCOPE : Boom lift at full elevation, telescope out and
record time. Tele in and record time.
DRIVE : The machine should be in the stowed position.
Test Notes
1. Personality settings can be adjusted anywhere within
the adjustment range in order to achieve optimum
machine performance.
2. Stop watch should be start when function starts.
3. Unless noted, function speeds should be measured from
the platform with one operator.
4. All test should be done with the oil temp above 65°F
(15.5°C).
Table 6-5. Machine Configuration Programming Information
Configuration
Digit
Setting Description
Market Default
0 1 2 3 4
1
(MODEL#)
0
1 T350 - 35ft.
T500 - 50ft. 0
2
(POWER)
0
1 Electric - 24V Battery
Engine - Honda Gasoline
0
3
(DRIVE)
3
0
1 NO - Drive option not installed.
YES - Drive option is installed.
0
4
(MARKET)
0
1
2
3
4 ANSI USA
ANSI EXPORT
CSA
CE
AUSTRALIA
0
5
(GROUND ALARM)
0
1
2
Not installed - Optional Ground Alarm shall not sound
Descent - Optional Ground Alarm shall sound for 1000mS On, 1000mS Off during lift down operations.
MOTION - Optional Ground Alarm shall sound for 1000mS On, 1000mS Off during drive, lift, swing,
telescope, level jib and L/J operations.
1 1 1 1
NOTE: 1. When configuring a T-Series vehicle, the Machine Configuration must be completed before any Personality settings can be changed.

Changing the Personality settings first and then changing the Model of the Machine Configuration will cause the Personality settings to return to default value.

2. Shaded entries are not available (adjustable) for the selected Market.

3. DRIVE Machine Configuration Setting only available when POWER is set to 1= ENGINE (Ground Module Version P1.3).
4150562-B