JLG Skytrak 6036, Operation & Safety Manual

Page: 69 / 188

Section 4- Operation
4-3 31211018
Normal Engine Operation
• Observe gauges and indicators frequently to be sure all systems are functioning properly.
• Be alert for unusual noises or vibration. When an unusual condition is noticed, park
machine in safe position and perform shut-down procedure. Report condition to your
supervisor or maintenance personnel.
• Avoid prolonged idling. If engine is not being used, turn it off.
• If prolonged idling is required (park brake applied), engine idle may increase if
ambient temperature goes below -1°F (-17°C).
• When operating a machine at high altitudes, a decrease in machine performance may
occur due to a decrease in air density. When operating a machine at high
temperatures, a decrease in machine performance and an increase in engine coolant
temperature may occur. Contact JLG for operation under abnormal conditions.
Shut-Down Procedure
When parking the telehandler, park in a safe location on flat level ground and away from
other equipment and/or traffic lanes.
1. Apply the park brake.
2. Shift the transmission to “Neutral.”
3. Lower forks or attachment to the ground.
4. Operate engine at low idle for 3 to 5 minutes. DO NOT over rev engine.
5. Shut off engine and remove ignition key.
6. Exit telehandler properly.
7. Block wheels (if necessary).