JLG Skytrak 6036, Operation & Safety Manual, Page: 6 / 188

Read This First
d 31211018
Other Publications Available
Service Manual.............................................................................................................................31211015
Parts Manual
6036 & 6042...........................................................................................................................31211016
8042, 10042 & 10054 ..........................................................................................................31211017
Note: The following standards may be referenced in this manual:
ANSI is compliant to ANSI/ITSDF B56.6
AUS is compliant to AS 1418.19
CE is compliant to EN1459
Refer to the machine Serial Number Plate to identify the applicable compliance standard.
Machine Configuration
Two configurations of each machine are included in this manual. Determine if machine is
equipped with Ultra Low Sulfur Fuel Decal (
1 ) as indicated below.
• If equipped with the Ultra Low Sulfur decal, all specific references to this machine
configuration will be referred to as Ultra Low Sulfur ( ULS ) from this point forward.
• If not equipped with the Ultra Low Sulfur decal, all specific references to this machine
configuration will be referred to as Low Sulfur ( LS ) from this point forward.
Maximum engine power can be found on the decals ( 2 ) located on the inside of the side
engine compartment doors.
O 5603 H
ULTRA LOW
SULFUR DIESEL
FUEL ONLY
S < 15 mg/kg
1001125387 A
XXXhp (XXkW) @ XXXX RPM
XXXXXXXXXX_A
2 1
XXXhp (XXkW) @ XXXX RPM
XXXXXXXXXX_A
(8042, 10042, 10054)
(6036, 6042)
2