JLG Skytrak 3013, Operation & Safety Manual

Page: 87 / 136

Section 5 - Attachments and Hitches
5 - 15 31211476
This installation procedure is designed for one-person operation.
1. Tilt quick attach forward to provide clearance.
2. Align engaging edge with recess in attachment.
Raise boom slightly to engage edge in recess.
3. Check to be sure lock pins are disengaged. Tilt quick
attach back to engage attachment.
4. Press and hold button (
1
) and button (
2
), at
the same time move the joystick right to
engage or left to disengage the lock pins.
At the same time, the latch pins go in and
out of the slot.
Note: From inside the operator's cab, visually
check that latch pins are in the slot before
raising the boom.
5. Raise boom to eye level and visually check that the lock pins protrude through the
attachment holes. If the pins do not protrude through the holes, place the
attachment on the ground and return to step 2.
6. If attachment is equipped, connect auxiliary hydraulic hoses. See “Hydraulic Operated
Attachment” on page 5 - 16.
ON0350
ON0360
ON0370
1
2
ON0380