SECTION 5 - ACCESSORIES
5-4
31215090
Preparation and Inspection
• Do not use appliances with damaged or wet cords.
• Route appliance cords and extension cords to prevent accidental
pinching, crushing, abrading, and tripping hazards.
• Do not use the inverter near flammable materials or in any loca-
tions that may accumulate flammable fumes or gases. This is an
electrical device that can briefly spark when electrical connections
are made or broken.
Operation
1.
Set the built-in inverter ON/OFF switch to the ON position.
2.
At the ground control console, set the inverter ON/OFF
switch to the ON position.
NOTE:
Only plug in tools or appliances rated within the maximum out-
put wattage at the platform AC receptacle.
5.4
PIPE RACKS
Pipe Racks provide a way to store pipe or conduit inside the platform
while avoiding rail damage and optimizing platform utility when
transporting material to an elevated site. It consists of two racks
attached to the platform handrails with adjustable straps that secure
the load in place.
1.
Working Position
2.
Stowed Position
3.
Capacity Decal
4.
Work/Stow Locking Pins
0"%
To
order
go
to
Discount-Equipment.com
