JLG G10-43A, Operation & Safety Manual

Page: 128 / 170

Section 6 - Emergency Procedures
6-2 31200150
6.2 EMERGENCY LOWERING OF BOOM
In the event of total loss of engine power or hydraulic pump failure with an elevated
load, the situation must be properly evaluated and dealt with on an individual basis.
Contact a local Authorized Distributor for specific instructions.
Secure the telehandler using the following procedures:
1. Clear the area around telehandler of all personnel.
2. Engage the parking brake. Place the transmission control lever in “NEUTRAL”.
3. Block all four wheels.
4. Section off a large area under the boom with string or tape to restrict any
personnel from entering this area.
6.3 EMERGENCY EXIT FROM ENCLOSED CAB
• In an emergency, an escape hammer located directly below the rear window in
an enclosed cab can be used to exit the telehandler.
ANGUS-PALM 005413
O W O 7 40