JLG E450A, Service And Maintenance Manual, Page: 117 / 480

SECTION 4 - BOOM & PLATFORM
3121714 4-1
SECTION 4. BOOM & PLATFORM
4.1
PLATFORM
Support Removal
1. Disconnect electrical cables from control console.
2. Remove the bolts securing the platform to the platform
support, then remove the platform.
3. Using a suitable lifting device, support the platform sup-
port.
NOTE: The platform support weighs approximately 77 lbs. (35 kg).
4. Remove the bolts and locknuts securing the support to
the rotator.
5. Using a suitable brass drift and hammer, remove the
rotator shaft, then remove the support from the rotator.
3/$7)20
6833257
/2&.187 6+$)7
%2/7
527$725
Figure 4-1. Location of Components Platform Support