JLG E450A, Service And Maintenance Manual

Page: 175 / 480

SECTION 5 - BASIC HYDRAULIC INFORMATION & SCHEMATICS
3121714 5-17
Table 5-9. DIN 24° Cone (MBTL & MBTS)
TYPE/FITTING IDENTIFICATION
DIN 24° CONE FLARELESS BITE FITTING
(With or Without O-Ring)
MA
TER
IAL
TY
P
E
Tube
O.D.
Thread M
Size
ØA* ØB* C* ØD*
Torque Flats from
Wrench
Resistance
(F.F.W.R)**
[Ft-Lb] [N-m]
(mm) (Metric) (mm) (mm) (mm) (mm) Min Nom Max Min Nom Max
STEEL FI
TT
IN
GS
WITH STEEL MA
TING C
O
MPONENT
S
DIN
24° C
O
NE FL
ARELESS BITE (MBTL)
FIT
TING
6 M12 x 1.5 10.50 12.00 7.00 6.20
FFWR is the recommended
method of fitting assembly.
Torque values are application
specific due to variability in the
fitting supplier, coating,
lubrication, and other physical
characteristics of the connection.
Refer to the specific procedure
in the
1.5 to 1.75
8 M14 x 1.5 12.50 14.00 7.00 8.20 1.5 to 1.75
10 M16 x 1.5 14.50 16.00 7.00 10.20 1.5 to 1.75
12 M18 x 1.5 16.50 18.00 7.00 12.20 1.5 to 1.75
15 M22 x 1.5 20.50 22.00 7.00 15.20 1.5 to 1.75
18 M26 x 1.5 24.50 26.00 7.50 18.20 1.5 to 1.75
22 M30 x 2 27.90 30.00 7.50 22.20 1.5 to 1.75
28 M36 x 2 33.90 36.00 7.50 28.20 1.5 to 1.75
35 M45 x 2 42.90 45.00 10.50 35.30 1.5 to 1.75
42 M52 x 2 49.90 52.00 11.00 42.30 1.5 to 1.75
TY
P
E
Tube
O.D.
Thread M
Size
ØA* ØB* C* ØD*
Torque Flats from
Wrench
Resistance
(F.F.W.R)**
[Ft-Lb] [N-m]
(mm) (Metric) (mm) (mm) (mm) (mm) Min Nom Max Min Nom Max
DIN 24° C
O
NE FL
ARELESS BITE (MBT
S) FI
TT
IN
G
6 M14 x 1.5 12.50 14.00 7.00 6.20
FFWR is the recommended
method of fitting assembly.
Torque values are application
specific due to variability in the
fitting supplier, coating,
lubrication, and other physical
characteristics of the connection.
Refer to the specific procedure
in the
1.5 to 1.75
8 M16 x 1.5 14.50 16.00 7.00 8.20 1.5 to 1.75
10 M18 x 1.5 16.50 18.00 7.50 10.20 1.5 to 1.75
12 M20 x 1.5 18.50 20.00 7.50 12.20 1.5 to 1.75
14 M22 x 1.5 20.50 22.00 8.00 14.20 1.5 to 1.75
16 M24 x 1.5 22.50 24.00 8.50 16.20 1.5 to 1.75
20 M30 x 2 27.90 30.00 10.50 20.20 1.5 to 1.75
25 M36 x 2 33.90 36.00 12.00 25.20 1.5 to 1.75
30 M42 x 2 39.90 42.00 13.50 30.20 1.5 to 1.75
38 M52 x 2 49.90 52.00 16.00 38.30 1.5 to 1.75
* ØA, ØB, C, & ØD thread dimensions for reference only.
** See FFWR and TFFT Methods for FFWR procedure requirements.