JLG 740A, Service And Maintenance Manual

Page: 315 / 408

SECTION 5 - HYDRAULICS
3121160 – JLG Lift – 5-29
Plug and Fitting Sizes and Torques
If any plugs or fittings are removed from the unit during
service, install and torque as indicated here. This drawing
is a composite. Your configuration may differ but the
appropriate wrench size and torque can be found here.
J041/J043/J044/J046
M14
6mm
27-35 N•m
[20-26 lbf•ft]
$
$ 9/16 in
1/4 in
34-68 N•m
[25-50 lbf•ft]
J080/J081/J082
M18
8mm
41-95 N•m
[30-70 lbf•ft]
$ $ M14
6mm
27-35 N•m
[20-26 lbf•ft]
J040
(M14)
6mm
27-35 N•m
[20-26 lbf•ft]
$
K040
7/8 in
3/8 in
54-136 N•m
[40-100 lbf•ft]
$
K045
7/8 in
3/8 in
54-136 N•m
[40-100 lbf•ft]
$
Figure 5-20. Plug Locations, Sizes, and Torques