JLG 340AJ, Service And Maintenance Manual

Page: 19 / 370

SECTION 1 - SPECIFICATIONS
3121259 – JLG Lift – 1-1
SECTION 1. SPECIFICATIONS
1.1 OPERATING SPECIFICATIONS
1.2 DIMENSIONAL DATA
1.3 CAPACITIES
1.4 TIRES
1.5 ENGINE DATA
Table 1-1. Operating Specifications
Capacity: Unrestricted:
ANSI
CE & Australia
500 lbs. (227 kg)
500 lbs. (230 kg)
Maximum Travel Grade, stowed
Position (Gradeability) 45%
Maximum Travel Grade, stowed
Position (Side Slope) 5°
Drive Speed - Stowed 3.1 mph (5.0 kph)
Elevated Drive Speed 0.6 mph (1.0 kph)
Gross Machine Weight - Approximate
ANSI
CE & Australia
9400 lbs. (4263 kg)
9700 lbs. (4400 kg)
Ground Bearing Pressure
Pneumatic
Foam Filled
Solid
Non-Marking Solid
59 psi (4.1 kg/cm
2
)
64 psi (4.5 kg/cm
2
)
70 psi (4.9 kg/cm
2
)
81 psi (5.7 kg/cm
2
)
System Voltage 12V DC
Maximum Main Relief Hyd. Pressure 4060 psi (280 Bar)
Table 1-2. Dimensional Data
Turning Radius (Inside) 5’ (1.52 m)
Turning Radius (Outside) 13’ (3.96 m)
Machine Height (stowed) 6’ 7" (2 m)
Machine Height (storage) 7’ 1" (2.17 m)
Machine Length (stowed) 18’ 2" (5.52 m)
Machine Length (storage) 13’ 1" (3.98 m)
Up and Over Platform Height 17’ 0" (5.17 m)
Horizontal Reach 19’ 11" (6.06 m)
Machine Width 6’ 4" (1.93 m)
Wheel Base 6’ 2" (1.87 cm)
Platform Height
ANSI
CE & Australia
33’ 9" (10.29 m)
33’ 10.5" (10.33 m)
Ground Clearance 10.1" (23.7 cm)
Table 1-3. Capacities
Hydraulic Oil Tank (to Full Level) 20.6 gal. (77.9 L)
Drive Hub
*
25.5 oz. (0.75 L)
Engine Coolant 1.55 gal. (5.9L)
*
Drive hubs should be one half full of lubricant.
Table 1-4. Tires
Size 265/50 D20 (20" x 9")
Maximum Tire Load 4800 lbs. (2177 kg)
Type Air, Foam-Filled
Size 18" x 7"
Maximum Tire Load 4800 lbs. (2177 kg)
Type Solid
Table 1-2. Dimensional Data
Table 1-5. Kubota D1105-E3
Type Liquid Cooled
Number of Cylinders 3
Bore 3.07 in. (78 mm)
Stroke 3.09 in. (78.4 mm)
Total Displacement 68.5 cu. in. (1123 cm3)
Compression Ratio 24:1
Firing Order 1-2-3
Output 24.8 hp (18.5 kW)
Low Idle RPM 1200 ± 50
High Idle RPM 3000± 50