JLG 3369LE, Operation And Safety Manual, Page: 81 / 83

SECTION 6 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
31215084
6-15
.
3. The tightening of the nuts should be done in stages. Fol -
lowing the recommended sequence, tighten the nuts
per wheel torque chart, Table 6-3 on page 6-15.
Wheel nuts should be torqued after first 50 hours of operation
and after each wheel removal. Check torque every 3 months
or 150 hours of operation.
1
2
3
4 5
6
7
8
9
9 LUG PATTERN
Table 6-3. Wheel Torque Chart
TORQUE SEQUENCE
1st Stage 2nd Stage 3rd Stage
40-50 ft lbs
(60-70 Nm)
90-105 ft lbs
(125-150 Nm)
145-170 ft lbs
(200-240 Nm)
To
order go
to
Discount-Equipment.com