SECTION 5 - JLG CONTROL SYSTEM
5-22
31215079
Allow Drive
This mode allows a service technician to drive the
machine when an active DTC prevents normal drive
functionality. Before initiating this service mode, the ser-
vice technician must verify the platform is stowed and
the leveling jacks are retracted before drive function will
be enabled. Drive speed will only be allowed at elevated
speed.
1. Using the Analyzer, navigate to SERVICE MODE >
ALLOW DRIVE.
2. Input the pass code
82221
and select Enter.
3. The Analyzer will display ALLOW DRIVE? Select Enter.
4. The Analyzer will display PLATFORM STOWED? Select
Enter.
5. The Analyzer will display L/J RETRACTED? Select
Enter.
6. The Analyzer will display DRIVE ALLOWED. Select
Escape to leave menu.
Allow Leveling Jack Retract
This mode allows a service technician to retract the lev-
eling jacks when an active DTC prevents normal leveling
jack functionality. Before initiating this service mode,
the service technician must verify the platform is
stowed before the leveling jacks can be retracted.
1. Using the Analyzer, navigate to SERVICE MODE >
ALLOW LJ RETRCT.
2. Input the pass code
3.
54749
and select Enter.
4. The Analyzer will display ALLOW LJ RETRCT? Select
Enter.
5. The Analyzer will display PLATFORM STOWED? Select
Enter.
6. The Analyzer will display RETRCT ALLOWED. Select
Escape to leave menu.
Go to
Discount-Equipment.com
to
order your
parts
