SECTION 3 - CHASSIS, PLATFORM, & SCISSOR ARMS
3-72
31215079
Throttle Actuator Adjustment
Air Gap Setting
AIR GAP SETTING PROCEDURE
1. The distance between the throttle arm and the high
idle stop must be 0.75 mm (0.030 in) when the actua-
tor is energized.
NOTE:
When the actuator solenoid is energized, the actua-
tor plunger must be fully seated to prevent coil burn-
out.
MAF15610
Figure 3-62. Throttle Assembly and Linkages
NOTE:
Illustration shows actuator in de-energized state.
HARNESS CONNECTION
THROTTLE ACTUATOR
PLUNGER ROD
A C T U AT O R -
PLUNGER
THROTTLE LEVER
HIGH IDLE STOP
LOW IDLE STOP
THROTTLE LINKAGE ASSEMBLY
MAF15600
Figure 3-63. Air Gap Setting
0.75 mm (0.030 in)
Go
to
Discount-Equipment.com
to
order
your
parts
