SECTION 3 - CHASSIS & SCISSOR ARMS
3121788
3-19
Installation/Removal
1.
Disconnect the platform control station harness
at the round connector on front the control sta-
tion.
2.
Remove the pin securing the control station to
the platform station mount, lift up and swing tab
out of slot in mount, remove control station from
the machine.
3.
To install, reverse steps 1 and 2 above.
Control Station Disassembly
1.
Place the platform control station assembly on a
suitable work bench.
2.
Remove the main body from the mount, by
removing bolt, cap-nut and washers (item 1) and
the two bolts and washers (item 2) on the bot-
tom of the assembly.
3.
To install, reverse steps 1 and 2 above.
Figure 3-15. Platform Control Station Installation
1.
Harness Connector
2.
Mounting Pin
3.
Lift and Remove
1
MAF11200
Figure 3-16. Platform Control Station Disassembly
1.
Through Bolt, Cap-nut
and Washers
2.
Rear Edge Bolts and Nuts
MAF11210
2
1
1
Go to
Discount-Equipment.com
to
order your
parts
