JLG 2632R, Service Maintenance Manual

Page: 133 / 195

SECTION 5 - JLG CONTROL SYSTEM
3121788 5-11
5.7 MACHINE MODEL ADJUSTMENT (PERSONALITY SETTINGS)
NOTE: These settings may be changed in order to achieve optimal performance.
Table 5-2. Machine Model Adjustment (Software Version P1.10)
Adjustment Adjustment Range 2632R 3246R
DRIVE
ACCEL 0.1 - 5.0 (Sec) 1.5 1.5
DECEL 0.1 - 2.0 (Sec) 0.5 0.5
MINIMUM 1 - 25% 8 8
MAXIMUM 26 -100% 100 100
ELEV. MAXIMUM 0 - 50% 28 43
STEER
ACCEL 0.1 - 5.0 (Sec) 0.1 0.1
DECEL 0.1 - 1.0 (Sec) 0.3 0.3
MIN 1 - 25% 5 5
MAX 26 -100% 60 60
LIFT
ACCEL 0.1 - 5.0 (Sec) 0.7 0.7
DECEL 0.1 - 1.0 (Sec) 0.1 0.1
UP MIN 1 - 45% 20 20
UP STOP 1 - 100% 55 70
UP MAX 31 - 100% 69 100
UP CREEP 1 - 100% 50 50
DOWN MIN 250 - 350mA 280 350
DOWN S-STOP 250 - 1200mA 450 470
DOWN MAX 351 - 1200mA 1040 1040
DOWN EARM 250 - 1200mA 370 470
DOWN CREEP 250 - 1200mA 370 470
JOYSTICK
FWD MIN 1.95 - 2.45 V 2.20 2.20
FWD MAX 0.94 - 1.44 V 1.19 1.19
REV MIN 2.59 - 3.09V 2.84 2.84
REV MAX 3.53 - 4.03 V 3.78 3.78
GROUND
HORN 1 - 100% 94 94
ALARM 1 - 100% 25 25
LOAD
OVERLOAD DEBOUNCE 0.0 - 5.0s 0.3s 0.3s
OVERLOAD HOLD 0.0 - 5.0s 5.0s 5.0s
ACC'Y 0 - 200KG 0 0
TEMP CUTOUT
CUTOUT SET -18 - 0 C -18 -18
1001207564-H
Go to
Discount-Equipment.com
to
order your
parts