ADC D30 DRYER
Installation Specification - Dimensions shown in millimetres
Model D30
Dimensions (HxWxD) Gas/Steam
1835 x 870 x 765mm
Electric
1910 x 870 x 765mm
Boxed
1960 x 910 x 780mm
Nett weight
Gas/Electric
185kg (407lb)
Steam
197kg (433lb)
Water Connection
No of inlet valves
1 cold
Minimum pressure
1.4 bar (20 psi) (max 60psi)
Inlet size
3
/
4
” BSP via 15mm supply
Flow rate
20 litres/min
Electrical
Standard Gas or Steam
240v/50Hz/1ph/13A
Reversing motor model
415v/50Hz/3ph+N/10A/ph (optional)
Electric
415v/50Hz/3ph+N/32A/ph - 18kw
Motor rating
373 watt
Gas
Heat input
23kw (78,000Btu)
Supply Pressure
Natural gas
15mb(6”wc) min - 30mb (12”wc) max - above 30mb a regulator must be fitted.
Burner Pressure
Natural gas
8.7mb(3.5”wc)
Supply Pressure
LPG
Propane 37mb(14.8”wc) Butane 28mb(11.2”wc)
Inlet size
1
/
2
” BSP male via a
1
/
2
” flexible armoured hose
Exhaust & Ventilation - Recommended Guides
Exhaust outlet size
200mm (8”) dia
Total max. length
Horizontal
25.9m (85ft) This allows for the use of 1 No 90 degree bend
Vertical
16.7m (55ft) This allows for the use of 1 No 90 and 1 No 180 bend
Max permissible exhaust back pressure
0.74mb (0.3”wc)
Airflow
Gas/Electric/Steam
10.93m
3
(386ft
3
)/min
Free air intake requirement
0.05m
2
(78in
2
)
Steam
Consumption
45kg/hr (100lb/hr) @ 125 psi
Operating Pressure
7kg/cm
3
(100psi) - 8.8kg/cm
3
(125psi)
Connection - supply/return
1” BSP/
1
/
2
” BSP
Compressed air (Steam model ONLY)
Consumption
0.02m
3
/hr (0.75ft
3
/hr)
Pressure
80psi
Connection
1
/
8
” BSP
Minimum installation distance - Rear
400mm
I/D30/09/04
A - Electrical connection, B - Gas Inlet, C - Steam Inlet, D - Steam return, E - Exhaust outlet, F - Steam dryer operating height,
G - Water Inlet (S.A.F.E. Sensor Activated Fire Extinguishing system), H - Compressed air connection (Steam only)
