➔
➔
➔
➔
Stealthbox
®
I N S T A L L A T I O N G U I D E
S B - N - 3 5 0 / 1 0 W 3 v 2 , J L AU D I O, I n c 2 0 0 4
S h e e t S K U # 0 1 1 1 8 7 R ev i s i o n 2 / 1 1 / 2 0 0 4
Pa g e 1
for the
SB-N-350/10W3v2
(2003-Up 350Z, Will not fit the 350z
Roadster, Infiniti G35 Coupe & Sedans)
This Stealthbox is a product which
requires professional installation skills and
tools.
Please read this installation guide thor-
oughly before beginning the project. It
will guide you step by step through the
installation. Several of the steps in this
process may require two people to
accomplish.
It is absolutely vital that the enclosure
be properly mounted to the vehicle
according to these instructions. Failure
to mount the enclosure properly pres-
ents two problems: 1) The sub-bass
performance will suffer due to the
movement of the enclosure caused by
the force exerted by the woofer(s) and
2) A loose enclosure presents a serious
safety hazard in the event of a collision
or sudden deceleration.
Please enjoy your JL Audio Stealthbox
responsibly.
STEP 1:
Remove all contents from center
console, rear cargo area, rear glove box com-
partments, lastly slide and tilt the seats to the
front of the car.
STEP 3:
Remove the driver’s side and pas-
senger’s side door sill panels.
*Carefully pulling directly upward.*
STEP 2:
Remove the driver’s side and pas-
senger’s side rear interior cargo quarter pan-
els.
STEP 4:
Remove the Philip head screws, that
are found on both diver’s side and passen-
ger’s side of the console.
STEP 5:
Remove the two Philip head screws
that have been exposed by the removal of
the ashtray.
START
HERE
Continued on Next Page
➔
w w w . j l a u d i o . c o m
➔
➔
STEP 6:
Loosen the shifter trim panel by pulling
directly up. Pull the panel away from the console.
Manual transmission shifter shown in picture, auto-
matic shifter removal maybe slightly different, then
shown.
*
Careful not to damage the shifter or
scratch the dash panel. *
