I n s t a l l a t I o n G u I d e
for the
SB-H-CRV/10W3V3
sKu#94429
2007+
Thank you for choosing a JL Audio Stealthbox
®
for your automotive sound system. With proper
installation, your new vehicle-specific enclosed subwoofer system will deliver years of listening pleasure.
We strongly recommend that you have your new Stealthbox
®
installed by your authorized JL Audio
dealer. The installation professionals employed by your dealer have the necessary tools and experience
to disassemble and reassemble your vehicle properly. If you prefer to perform your own installation,
please read this installation guide completely
before beginning the process.
If you choose to perform the installation yourself, it is absolutely vital that
the Stealthbox
®
be properly mounted to the vehicle according to these
instructions. Failure to mount the enclosure properly presents two problems:
1) The sub-bass performance will suffer due to the movement of the enclosure
caused by the force exerted by the woofer(s).
2) A loose enclosure presents a serious safety hazard in the event of a collision
or sudden deceleration.
s t e P 1
Remove any contents in the trunk of the car so that you
will have a clean area to work in.
Place the Wax Square as
shown
Continued on Next Page
s t e P 2
Thread the included Hex Head Bolt into the enclosure so
that approximately 1/2” remains exposed (as shown).
s t e P 3
Set the Stealthbox in place. Push in and, down as
indicated by the arrows to get the bolt to make an
impression in the wax square.
SB-H-CRV/10W3V3 INSTR_SKU#011281
InstallatIon
d I F F I C u lt Y :
3
5
out
oF
estImated tIme:
2-3 HouRs
