background image

I M P O RTA N T

!

Thank you for purchasing a JL Audio amplifier for 

your marine sound system. 

Your amplifier has been designed and manufactured to exacting

standards in order to ensure years of musical enjoyment in your

vessel. For maximum performance and extended warranty 

coverage, we highly recommend that you have your new amplifier

installed by an authorized JL Audio dealer.  Your authorized 

dealer has the training, expertise and installation equipment to

ensure optimum performance from this product. Should you 

decide to install the amplifier yourself, please take the time 

to read this manual thoroughly so as to familiarize yourself 

with its installation requirements and setup procedures.

If you have any questions regarding the instructions in this 

manual or any aspect of your amplifier’s operation, please contact

your authorized JL Audio dealer for assistance. If you need further

assistance, please call the JL Audio Technical Support Department at

(954) 443-1100 during business hours (Eastern Time Zone).

JL AUDIO 

e2150M 

two-channel full-range marine amplifier

o w n e r ’ s   m a n u a l

Summary of Contents for E2150M










Reviews: