Installation
Instructions
Product:
Steering Brace System™
JKS Steering Brace System Installation
PN OGS960 / OGS962
Page 1 of 5
Part Number:
PN OGS960 / OGS962
Application:
Jeep® Cherokee XJ, 1984-01
Welcome
CONGRATULATIONS on your purchase of a
new JKS Steering Brace System! At JKS
Manufacturing, we are committed to providing
you with the best products available and your
satisfaction is our first priority.
READ INSTRUCTIONS THOROUGHLY to
familiarize yourself with the required skills and
tools BEFORE attempting installation.
ATTENTION INSTALLER
Review the front bumper re-
installation section on page 5
BEFORE
installing product.
Important
INSTALLATION REQUIRES WELDING
to the
unibody chassis by a qualified welder or metal
fabricator. A bolt-on installation is not possible
for this product.
CHECK STEERING GEAR TORQUE SPECS
on a regular basis.
Tools Required
Metric/Standard Socket Wrench Set
Torque Wrench
Die Grinder with Sanding/Grinding Wheels
(or similar tool for cleaning chassis)
5/8” Drill Bit, or
preferably
a Uni-bit
(for enlarging holes in chassis)
Carbide Cutting Tool *
(for enlarging holes in chassis)
3/4” Drill Bit (for new tow hook holes)
C-clamp or Locking Pliers
Hammer *
Factory Service Manual (recommended)
Welding Equipment
Satin Black Spray Paint
* Asterisk denotes tools that are not required for some
applications. Thoroughly read instructions first to
determine which tools will be required for your
application.
Parts
PN OGS960 pictured
DESCRIPTION
QTY
A
Outer Chassis Plate (3/16”)
1
B
Inner Chassis Plate (1/8”)
1
C
Support Sleeves
3
D
Steering Gear Mounting Bolts
3
E
Flat Washers
3
F
Installation Spacers
3
G
Tow Hook Support Bracket
1
H
3/4” Solid Rod
1
HOLE IDENTIFICATION DIAGRAM
