4
Getting Connected
Setting Up for Analog Telephones
1. Unplug the telephone cord from the base of your telephone and plug it into
the jack on the Inline Patch marked <Phone Line>.
2. Using the telephone cable we have provided, plug one end into your Inline
Patch marked <Phone> and the other end of the cable into your telephone.
3. Connect your audio equipment to the 3.5mm and / or XLR line input and
output jacks on the Inline Patch.
4. Connect the power supply to the back of the Inline Patch.
Note: If you want to use a microphone to add extra audio to the call, you will first need to
add an amplifier to your microphone so that the signal is boosted to line level. You can use
both the XLR and the mini jack input at the same time, and add it to the audio coming from
the handset microphone. The level of the audio you send through the input jacks into the
phone line can be adjusted with the Send control. Note that this audio will come back mixed
with the caller audio, so be sure not to overpower the caller’s voice with your own audio.
POWER
