www.
jisoiluminacion
.com
1/4
Min.Bending Diameter
D120mm
24V
DC
Side View
Neon
UV
Resistant
Beam Angle
o
120
Cuttable
10CM
3
waterproof
IP67Protection
Installation Instructions N200414 // Jelly XL
*
Page 1: ...www jisoiluminacion com 1 4 Min Bending Diameter D120mm 24V DC Side View Neon UV Resistant Beam Angle o 120 Cuttable 10CM 3 waterproof IP67 Protection Installation Instructions N200414 Jelly XL ...
Page 2: ...n Bending Diameter VF IF PD Ra Φ W T R IP 24VDC 625 14 4 2700K 320LM 3000K 320LM 4000K 360LM 11 IP67 V mA M W M Lm 1M mm mm mm 20 90 120 100mm 200mm 11mm 1000mm 24VDC Drawing Thickness 20mm Installation Instructions N200414 Jelly XL The IP67 will be reach only when connectors are correctly sealed with neutral silicone material ...
Page 3: ... clips onto the wall Second push the neon light all the way down to the clips Third check the polarity and connect the cables to the power supply ＨＣＮ０４ Ｆ０１ Accessories End cap HCN04 T01 End cap with cables HCN04 C02 End cap with side cables HCN04 C04 Jumper connector HCN04 C03 Splice connector HCN04 C01 Installation Instructions N200414 Jelly XL All dimensions in mm HCN04 C02 HCN04 C01 HCN04 C03 H...
Page 4: ...urve is allowed only Don t twist the light emitting area Attention keep the curved radian 120mm During normal service do not bend LED strips with its back side up and front side down The LED strip cannot be distorted during normal service During normal service once need a turning must keep the curved radian 120mm and couldn t be a right angle Distortion Parallelly R 120mm R 120mm www jisoiluminaci...
