3.Technical Data
4.Tools Instruction
JKT-01
：
2.5mm²(14AWG)
、
4.0mm²(12AWG)
、
6.0mm²(10AWG)
The Stripping Tool-JKT-01 is applicable to 2.5mm²(14AWG) or 4.0mm²(12AWG) or
6.0mm²(10AWG) cable.
There is one stripping tool JKT-01 per tool set.
Function: Cutting the wire insulation (exposing the copper wire).
JKT-02
：
2.5mm²(14AWG)
、
4.0mm²(12AWG)
、
6mm²(10AWG)
The Crimping Tool-JKT-02 is applicable to 2.5mm²(14AWG) or 4.0mm²(12AWG) or 6.0mm²
(10AWG) cable.
There is one crimping tool-JKT-02 per tool set.
Function: The connection and crimping between the copper wire and metal terminals are
all made by the crimping tool.
Type Name or Model No.
Rated Voltage (
V DC)
PV-JK03M2-F/xy, PV-JK03M2-M/xy
1500 V DC
Rated Insulation Voltage
Rated Current (A DC)
Application Class
Class A
Protection Class / Pollution Degree
Class II / 2
Ambient Temperature
-40
℃
to
＋
85
℃
Upper Limit Temperature
115
℃
Over Voltage Category
CAT III
Flammability Class
Degree of Protection, mated / unmated
UL94 V-0
Rewireable
No
Cable Diameter
4
.
7mm to 8.0mm
Contact Resistance
≤ 0.2 m Ω
Contact material
Copper, tin plated
Insulation Material
PA
Existence of an enclosure
Enclosed connector
Certification Standard
IEC 62852 Edition 1.0 2014-11;
UL6703
IP65/ IP68 (1m, 2h) in mated condition
IP2X in unmated condition
8000 V (1500 V DC)
30 A (2.5mm²/14AWG)
45 A (4.0mm²/12AWG)
50 A (6.0mm²/10AWG)
60 A (10.0mm²/8AWG)
Wire Cross Section Area or Cross
Section Range
1X2.5mm²(14AWG) for x=1
；
1X4.0-6.0mm² (12AWG/10AWG) for x =2
；
1X10.0mm²(8AWG) for x=3
；
Note: PV-JK03M2-F/xy ; PV-JK03M2-M/xy (x=1 or 2, y=B or C)
Stripping Tool - JKT-01
Crimping Tool- JKT-02
Assembly Tool -JKT-06
JKT-06:
Assembly Tool -JKT-06
：
There are two assembly tools per tool set.
Function: Used for assembling and disassembling connectors.
Installation Manual for PV-JK03M2/xy Series Cable Connector | 07
06
