JING JIE UniPBX-2000, Administrative Manual

Page: 8 / 219

8
1 Getting Start
After successfully installed the system , first of all is to login to the web management
interface. You can either using IPv4 or IPv6 address to access GUI management
interface by using popular browser such as Internet Explorer or Firefox.
If you are installing a HA version, make sure that MYSQL database replication
service is working correctly and both server is running to make the setting
simplified.
1.1 Logon the system
After connect the Ethernet cable into the server machine, administrator need to use
a computer which had Firefox or IE installed and network connected in order to
connect to system GUI. For convenience, configuration computer is recommended
to have same subnet as the server.
Start the browse, and type http://xxx.xxx.xxx.xxx:9200 or https://xxx.xxx.xxx.xxx:9201
to login the web manage where xxx.xxx.xxx.xxx is the IP address. If the system is
using 2 ethernet leg, it might be easier to use LAN IP for connection.
After connected, you should able to see th following login page. Input the default user
ID "admin" and password "admin" and the validation code (CAPTCHA) to logon the
system.
1.2 Change Default Password
The default password of "admin" is madden for easy to remember. To secure the
system access, it is recommended to change the default password as the follows.