JING JIE UniPBX-2000, Administrative Manual

Page: 196 / 219

196
5.2.3 Start Accounting Message
When a call is connected, the RADIUS billing start could be set to send to RADIUS
server. The following is the Start Accounting Message which will be sent out.
Attri
bute
Attribute NameVSA ID Description For
mat
Example
4 NAS-IP-Address IP Address of the In-
Bound gateway Num
eric 4 bytes unsigned long
61 NAS-Port-Type NAS port type Num
eric 0: Asynchronous
1 User-Name User Account Strin
g 1001
31 Calling-Station-
Id Calling Party Number
(ANI) Strin
g 1001
30 Called-Station-Id Called Party Number
(DNIS) Strin
g 1002
40 Acct-Status-
Type Message Request Type Num
eric 1: Start Accounting
6 Service-Type Type of Service
Requested Num
eric 5: Outbound
26 H323-gw-id 33 Name of the SIP Proxy
Server Strin
g SIP Proxy Name or IP
26 call-origin-endpt 152 calling remote address
(public IP) Strin
g 112.3.1.3:5060
26 h323-remote-
address 23 called remote address
(public IP) Strin
g 112.4.1.1:8080
26 h323-conf-id 24 GUID Strin
g xxxxx-xxxxx
26 h323-call-type 27 Protocol type or family
used on this leg of the
call Strin
g VOIP
26 h323-call-origin 26 ‘Originate’ or ‘Answer’ Strin
g Originate
26 h323-setup-time 25 Setup time Strin
g yyyy/mm/dd hh:mm:ss
26 outgoing-setup-
time 171 Outgoing setup time Strin
g yyyy/mm/dd hh:mm:ss
26 call-alert-time 168 Alter time Strin
g yyyy/mm/dd hh:mm:ss