USR-WIFI232-A/B/C User Manual
http://www.usriot.com
Jinan USR IOT Technology Limited
Page 21 of 93
3.5
3.5
3.5
3.5 Hardware
Hardware
Hardware
Hardware Reference
Reference
Reference
Reference Design
Design
Design
Design
3.5.1
Hardware Typical Application
Figure 17
USR-WIFI232-A/B/C
USR-WIFI232-A/B/C
USR-WIFI232-A/B/C
USR-WIFI232-A/B/C Hardware
Hardware
Hardware
Hardware Typical
Typical
Typical
Typical Application
Application
Application
Application
Notes
Notes
Notes
Notes
:
nRST-
nRST-
nRST-
nRST-
Module hardware reset signal. Input. Logics “0” effective.
There is 100K Ohm pull-up resister internal up to 3.3V. When module power up or some issue
happened, MCU need assert nRST signal “0” at least 300ms, then set” 1” to keep module fully
reset.
Function
Name
Description
External
Interface
DB9
Male serial jack of 9-pin,and used to connect to
PC
RJ-45
100M Eth Interface
Mini USB
B
-
type interface,AS 5v@1A power input port
Module
2x7 2mm DIP connector
LED
Power (Red)
3.3V Power Indicator
CTS (Green 1)
CTS/GPIO Indicator
RTS(Green 2)
RTS/GPIO Indicator
Reload(Green
3)
nReload/GPIO Indicator
Ready(Green
4)
nReady/GPIO Indicator
Link(Green 5)
NLink/GPIO Indicator
Button
Reset
Used to reset the module.
Reload
Module restore to factory default configuration.