JCHR35H6E1 Remote control User manual
1
、
Remote control Effect Picture
2
、
Remote control function description
2.1 Pairing:
Remote control pair code:
1) put the battery into the remote control.
2) power the control box (supporting our control box).
3) at the same time, hold down the head up button on the remote control and the foot up button.
When the LED on the control box to be matched stops flashing and the buzzer makes a sound, the
pairing operation is completed. To test whether or not the pairing is successful, head up/down, foot
up and down keys, buttons and so on related to drive, if you can hear the "tick" sound emitted by
the relay, specification matching success. Otherwise, repeat all the above steps.
Note: after successful code alignment, operate any two buttons at the same time during use, and
the remote control will not send signals.
