JHCTech KMDA-3610 User Manual Download Page 61

Page: 61 / 70

User’s Manual

3.2.7 Save & Exit menu

Save changes and Exit;

This item enables you to save the changes that you have made and exit.

Discard Changes and Exit;

This item enables you to discard

the changes that you have made and exit.

Save Changes and Reset;

This item enables you to save

the changes that you have made and reset.

Discard Changes and Reset;

This item enables you to discard

the changes that you have made and reset.

Save Changes;

This item enables you to save

the changes that you have made.

Discard Changes;

This item enables you to discard

the changes that you have made.

Restore Defaults;

This item enables you to restore the system defaults.

Save as User Defaults;

This item enables you to save the changes as user defaults that you have made.

Summary of Contents for KMDA-3610







































































Search results

Summary of Contents for KMDA-3610

Reviews:

Related manuals for KMDA-3610

Brands by name

Popular brands

JHCTech KMDA-3610, User Manual

Search results

Summary of Contents for KMDA-3610

Reviews:

Related manuals for KMDA-3610

Brands by name

Popular brands