JHCTech KMDA-3602, User Manual

Page: 17 / 60

User’s Manual
10
Figure 2.2
A pair of needle-nose pliers may be helpful when working with jumpers. If you have any doubts about the
best hardware configuration for your application, contact your local distributor or sales representative
before you make any changes.
2.3 Jumper Location
The KMDA-3602 high-performance Box Computer has a number of jumpers inside the chassis that
allows you to configure your system to suit your application. The table below shows the function of each
of the board’s jumpers:
Figure 2.3
Jumpers
Jumper Name Description
CLR_CMOS1 Clear CMOS Data Setting 3-Pin Block
JP2 ITPS Mode and Power off delay Select 8-Pin Block