JHCTech KMDA-3601, User Manual

Page: 28 / 54

User’s Manual
21
Table 2.12 for LEDs state of CPU temperature class.
Table 2.12: LEDs state of CPU temperature class.
LED State
Red Warning
Yellow High
Green Normal
2.5 Installation
2.5.1 HDD/SSD Installation
Step 1: Unscrew 6 screws on the underside, remove the bottom bracket;
Step 2: Unscrew 2 screws on the front/rear panel, remove the bottom cover;
Step 3: Put the HDD/SSD in the drive bay and screw 4 screws;
Step 4: Put the drive bay in the HDD/SSD socket, lock the hard drive as follow picture;
Step 5: Put another HDD/SSD in the drive bay and screw 4 screws;
Step 6: Pull the drive bay onto the bottom cover and screw 4 screws;
Step 7: Using the SATA cable connect the HDD/SSD with the mother board;
Step 8: Close the bottom cover back to the chassis. install the front panel and screw 2 screws on the
front/rear panel;
Step 9: Install the bottom cover and bottom bracket, screw 6 screws.