JHCTech BRAV-7302, User Manual

Page: 56 / 60

User’s Manual
49
Step 5 –Install ME Driver
1. Double click on the ME folder and double click on the Setup.exe
2. Follow the instructions that the window shows
3. The system will help you install the driver automatically
Step 6 –Install RST Driver
1. Double click on the RST folder and double click on the Setup.exe
2. Follow the instructions that the window shows
3. The system will help you install the driver automatically
Step 7 –Install VGA Driver
1. Double click on the VGA folder and double click on the Setup.exe
2. Follow the instructions that the window shows
3. The system will help you install the driver automatically
4.3 CPU TEMP LED driver
The BRAV-7302 provides temperature showing in LEDs, economic and reliable. Users can monitor the
working state of the CPU according to the display of the LED. Please perform the following operations,
making LEDs work normally.
Find the CPU temperature test tool folder and open it, as shown below;
Run the exe application ；
NOTE : Please add the .exe application to the startup item to ensure that the program can run when
power on.
Figure 4.2
4.4 Utility Software Reference
All the utility software available from this page is Windows compliant. They are provided only for the
convenience of the customer. The following software is furnished under license and may only be used or
copied in accordance with the terms of the license. These software(s) are subject to change at any time
without prior notice. Please refer to the support disk for available software.