SX1 User Manual
22
M-SX1-001-01
9
Storage and Shipping
Damage can occur from improper handling. Make sure to maintain the unit within the specified
temperature range during storage or shipping. Please follow the recommendations below to minimize
the possibility of damage:
•
If possible, pack the unit in its original packing material when shipping.
•
Avoid high humidity or large temperature fluctuations that could generate condensation within
the unit.
•
Avoid unnecessary shocks and vibrations.
Returning Instruments to JGR Optics
As indicated above, please ship the returned material in the original shipping box and packing material. If
these are not available, follow the guidelines below:
1.
Contact JGR Optics to obtain an RMA number.
2.
Cover the front panel with foam to prevent damage.
3.
Wrap the unit in anti-static packaging. Use anti-static connector covers.
4.
Pack the uni
t in a strong enough shipping box considering the unit’s weight.
5.
Use enough shock-absorbing material (10 to 15 cm) to cushion the unit and prevent it from
moving inside the box. Pink poly anti-static foam is recommended.
6.
Seal the shipping box securely.
7.
Clearly mark FRAGILE on at least 3 of the 4 sides of the box.
8.
Always provide the model and serial number of the unit and, if applicable, the RMA number on
any accompanying documentation. If possible, indicate the RMA number on the box itself to
facilitate identification.
Contact Information
JGR Optics Inc.
160 Michael Cowpland Drive
Ottawa, Ontario, Canada
K2M 1P6
Phone: +1-613-599-1000
Fax: +1-613-599-1099
Email: [email protected]
Website : www.jgroptics.com
