Web Management User Guide
5
3 Hardware Installation
3.1 Package contents
Package contents include the following:
PoE Switch:16x10/100 PoE ports with 2x10/100/1000 combo ports Ethernet Switch
AC power cord
Two (2) rack-mount pallet and Six (6) screws
Four (4) adhesive-backed rubber feet
User’s manual
IMPORTANT:
If any piece is missing or damaged, please contact your local dealer or reseller for
service.
3.2 Switch Installation
Desktop or Shelf Installation
When installing the switch on a desktop or shelf, the rubber feet included with the device must be
attached on the bottom at each corner of the device’s base. Allow enough ventilation space
between the device and the objects around it.
Note:
Do not press on the switch. Any pressure more than 4.5kg may cause damage to switch.
Rack Installation
The switch can be mounted in an EIA standard size 19-inch rack, which can be placed in a wiring
closet with other equipment. To install, attach the mounting brackets to the switch’s side panels
(one on each side) and secure them with the screws provided.
Then, use the screws provided with the equipment rack to mount the switch in the rack.
