Jetter AG
Mechanical installation | 5
User Manual – JXM-IO-E30
21 / 70
5 Mechanical installation
WARNING
Risk of burns
Contact with hot surface may cause burns.
►
Take protective measures to prevent inadvertent contact
with the device.
►
Allow the device to cool down for some time before you
start working on it.
NOTICE
Damages to material or functional impairment due to
welding
Welding on the chassis may damage the device material, or
impair device functions.
►
Before you start welding, disconnect all connections be-
tween the device and the electric system of the vehicle.
►
Protect the device from flying sparks and welding beads
(splatter).
►
Do not touch the device with the welding electrode or
earth clamp.
NOTICE
Dirt and moisture can affect the electrical connections.
►
Protect unused pins using blanking plugs.
►
Protect all electrical connections with appropriate single
wire seals.
►
Clean the area around a connector prior to removing the
mating connector.
NOTICE
Functional impairment due to magnets or motors with
coil
Using magnets or motors with a coil in the vicinity of the
JXM-IO-E30 may adversely affect current readings of the in-
puts and outputs.
►
Ensure that there is sufficient clearance or shield the
JXM-IO-E30.