Jetter AG
Mechanical installation | 4
JXM-HMI User Manual
8 / 22
4 Mechanical installation
Mount the JXM-HMI only in a suitable place in the vehicle interior.
NOTICE
Damages to material or functional impairment
Welding on the chassis may cause damages to material of the device, or impair
its functions.
●
Before you start welding, disconnect all connections between the device and
the electric system of the vehicle.
●
Protect the device from flying sparks and welding beads (splatter).
●
Do not touch the device with the welding electrode or earth clamp.
4.1 Mounting in combination with a JVM-104
The JXM-HMI is particularly well suited for use in conjunction with the JVM-104
HMI. A special mounting plate is available for this purpose which enables both
devices to be mounted together.
Mounting Acces-
sories
Use the following accessories for installation:
Accessories
Item number
Holding plate for combination of
JXM-HMI
and JVM-104 for
RAM Mount ball
consisting of mounting plate and screws for housing with
Deutsch or M12 connector, without RAM mount attachments
10001832
Tab. 1:
Mounting Accessories
The illustration below shows how to install the device:
1
2
4
3
7
6
5
Fig. 2:
Installation drawing