Jetter JX2-IO16, User Manual

Page: 59 / 124

JX2-IO16 7.2 Register Interface
Jetter AG 59
Example2: Configuration consisting of one JX2-SV1
System consisting of a JC-24x, one JX2-IO16 and one digital output module JX2-
OD8:
7.2 Register Interface
The register interface consists of 10 registers which allow direct read or write access.
Key information is stored to these registers, and can be read out from here. In
addition, a register array is available which is used to parameterize JX2-IO16
functions and to read out additional diagnostic information.
For more information refer to Appendix B: "Overview of Registers", page 108.
7.2.1 Register Addressing
The register address is made up of the module number and the respective register
number.
Basic
controller
JC-24x
I/O Module
JX2-IO16
Servo
module
JX2-SV1
Input
module
JX2-ID8
Module # 1 Module # 2 Module # 3 Module # 4
Input 101 ... 116
Outputs 101 .. 108
Input
201 .. 208
Output
201 .. 208
SV Module
! ! !
Input
301 .. 308
Note!
In this manual outside this subchapter the register numbers are specified only
with their last 4 digits.