Jetter AG
43
JVM-507B
Mounting and installation of the JVM-507B
Replacing the Micro-SDHC card in the HMI JVM-507B
The illustration below shows where the Micro-SDHC card slot is located in the
HMI JVM-507B.
Number
Description
1
Micro-SDHC card slot
To insert the Micro-SDHC card into the slot, proceed as follows:
Step
Action
1
Carefully push the SDHC card into the SDHC card slot until you feel it
snap into place.
In doing so, the Micro-SDHC card label must be face down.
To remove the Micro-SDHC card from the Micro SDHC card slot, proceed as
follows:
Step
Action
1
Push the Micro-SDHC card slightly further into the slot. Let go of the card.
The Micro-SDHC card unlatches from the slot. Now, the card protrudes
from the slot.
2
Pull the card out of the slot.
Position of the
Micro-SDHC card slot
Inserting the
Micro-SDHC card
Removing the
Micro-SDHC card