38
Jetter AG
5 Mounting and installation of the JVM-507B
Videosignale anschließen
The illustration below shows the pin assignment of the video camera
connector (as viewed from the cable side):
Pin
Description
1
Video signal1 (+)
2
Supply voltage (DC 12 V)
3
Ground (GND)
4
Video signal1 (-)
5
Video signal2 (+)
6
Supply voltage (DC 12 V)
7
Ground (GND)
8
Video signal2 (-)
9
Video signal3 (+)
10
Supply voltage (DC 12 V)
11
Ground (GND)
12
Video signal3 (-)
13
Video signal4 (+)
14
Supply voltage (DC 12 V)
15
Ground (GND)
16
Video signal4 (-)
The total current consumption of all connected cameras must not exceed 1 A.
Pin assignment - Video
input
Note