Jetter AG
35
JVM-507B
Mounting and installation of the JVM-507B
CAN-Schnittstelle anschließen
This connector is also used for power supply.
The diagram shows the pinout of the connector for the CAN bus (as viewed
from the cable side):
Pin
Description
3
CANH2
4
CANL2
5
CANH1
6
CANL1
Twist the CAN wires CANH1 and CANL1 as well as CANH2 and CANL2
respectively.
Purpose of the
connector
Pinout of the CAN bus
connector
Note