Jetter JVM-407B-HMI, User Manual

Page: 68 / 300

68 Jetter AG
4 Mounting and installation of the JVM-407B
4.4 Replacing the battery and SD memory card
This chapter describes how to replace the battery and the SD memory card
through the service opening.

Observe the rules for handling ESD-sensitive components while replacing
the battery.

The rated voltage of the battery is 3.0 V +/- 10 %.
 The battery is integrated, residing in an intermediate socket.
A 1 GB SD industrial memory card is available from Jetter AG. The item
number is 60873281.
Topic Page
Replacing the battery of the HMI JVM-407B ................................................ 69
Replacing the SD card on the HMI JVM-407B ............................................. 71
Introduction
Notes on battery
replacement
Notes on SD card
replacement
Contents