Jetter JVM-407B-HMI, User Manual

Page: 171 / 300

Jetter AG 171
JVM-407B File system
Directories
\App
This directory holds application and visualization data. The screenshot below
shows two different ways to store the STX application: Either in the file
ngs_truck_johnston (left) or in the file jxmioe2test (right).
The screenshot to the left shows the file system of the old S platform. The
visualization application is stored to an *.iop file. In the given example it is the
file
visual.iop
.
The screenshot to the right shows the file system of the new CE platform. This
file system does not use *.iop files. JetViewSoft creates several visualization
files instead.
Note!
Copy all application and visualization files to the folder App and not to the
folder Data . Failure to do so will slow down the boot process, see directory
\Data .
start.ini
This text file defines which application will be started.
\App\sys\
This directory holds the interpreter of the STX programming language and of
the visualization. Do not make any changes here!
autostart.xxx
This application lets you update the operating system.
Do not make any
changes here!
Directory \App