Jetter JM-35 S1 Series, Manual, Page: 50 / 124

3 Overview of the connections
The servo amplifier has two separate inputs (STO1/STO2) for requesting
STO. These inputs are of two-channel design (CH1/CH2). They can be
allocated to the drive axes connected with the aid of the DIL switch block
(S-ADR).
The function SBC is linked to the inputs STO1 and can also be pre-set with
the aid of the DIL switch block (S-ADR).
Figure
X11
S-ADR
Fig. 3 Layout
50 Jetter AG
Overview of the connections JetMove 3000