Jetter JM-208-480-OEM, User Manual, Page: 89 / 128

JetMove 208-480 12 Ethernet Interface (Option)
Jetter AG 89
12 Ethernet Interface (Option)
12.1 Description
For the JetMove 208-480, an optional integrated Ethernet interface can be ordered
(article designation of the device: JM-208-480...-OEM). This allows for the
JetMove 208-480 to be addressed by the controller via Ethernet instead of via Jetter
system bus.
12.2 Description of Connections
The digital servo amplifier JetMove 208-480...-OEM is connected with the Ethernet
by a RJ45 socket (X71).
There are two types of interconnecting cables used for 10/100 MBit/s twisted pair
Ethernet:
• 1:1 straight-through twisted pair cables
• Crossover cables (transmitting and receiving lines are crossed)
Functional Equipment
1 Ethernet interface 10/100 MBit/s, TX
10-pin DIP switch for the lower 8 bits of
the IP address and of various operating
modes RUN / STOP / LOAD
LED for status indication RUN / ERR