Jetter JM-208-480-OEM, User Manual, Page: 57 / 128

JetMove 208-480 7.4 HIPERFACE® Connection
Jetter AG 57
7.4 HIPERFACE® Connection
7.4.1 Specifications
Specification of Mating Connector for X61 (ENCODER)
• 9-pin SUB-D male connector
• Metallized enclosure
Specification of HIPERFACE Cable
• Cable size: 4 * 2 * 0.14 mm² + 2 * 0.5 mm² (AWG 26(8*2) + AWG 20(2))
2 * 0.5 mm² (AWG 20(2)) are for connection of the power supply and GND signal.
• Cores have to be twisted in pairs and must be included in an overall shielding.
• The following signal lines must be twisted in pairs :
Sine + and reference sine
and reference cosine
DATA - and DATA +
0 V and voltage supply
• Shielding has to be connected to the connector housings on both sides.
• Material: Copper
• Temperature class: 60 °C
• Maximum cable length: 50 m
7.4.2 HIPERFACE® Cable with Mating
Connector
Notice!
The resolver respectively HIPERFACE® mating connector of the Jetter motor
types JL, JK, and JH and can be ordered from Jetter AG by supplying the
following particulars:
Item no. 15100069 Resolver / HIPERFACE
The complete HIPERFACE® cable connecting the servo amplifier series
JetMove 2xx and the motor types JL, JK and JH can be ordered from Jetter AG
by supplying the cable specifications and the respective cable length in cm:
KAY_0723-xxxx for the digital servo amplifier series JetMove 2xx